YAESU FT-2000D
YAESU FT-2000Dhttp://www.yaesu.com/ProductImages/FT-2000--D_thumb.jpg
http://www.yaesu.com/images/summary.gif
FT-2000 100 WATT & FT-2000D 200 WATT HF+6 TRANSCEIVERS Now includes additional features of PEP200-Performance Enhancement Program
The FT-2000 and FT-2000D are the 2nd Generation in the proud lineage of the FTdx9000 Series! Featuring extensive DSP filtering, 100 & 200 Watts of power output respectively, and a host of outstanding ergonomic and performance features, the FT-2000 and FT-2000D are destined to be the centerpiece of your HF/50 MHz station!
http://www.yaesu.com/images/Features.gif
160 - 6 Meter Coverage, 100 or 200 Watts of Power! The FT-2000 and FT-2000D provide a full 100 & 200 Watts of power output (AM: 25 W) on the 160-6 Meter Amateur bands, and the U.S. version includes a special memory bank containing the five 60-meter channels, as well.
Continuous receiver coverage from 30 kHz to 60 MHz is provided.
Note: frequency coverage may differ in your country. Extensive Receiver DSP Filtering! The power of IF Digital Signal Processing (DSP) is yours to enjoy with the FT-2000/D. Variable IF Width and IF Shift allow precise interference rejection, and the receiver DSP also includes an Auto-Notch, Manual Notch, Digital Noise Reduction, and a continuously-variable passband Contour control.
The WIDTH control has a mode-determined adjustment range of 200 Hz – 4 kHz for SSB, and 25 Hz to 2.4 kHz on CW, and a mode-optimized “Narrow” key provides one-touch narrowing of the bandwidth to a user-determined preset value. User-Adjustable Variable TX Bandwidth! With the FT-2000/D, you have tremendous control over the fidelity and/or “talk power” of your SSB signal, thanks to the variable SSB bandwidth capability in the Menu. The default bandwidth is 2.4 kHz (300 – 2400 Hz @ -6 dB), but you also have selections of 50 – 3000 Hz, 100 – 2900 Hz, 200 – 2800 Hz, and 400 – 2600 Hz, allowing you to select the bandwidth best suiting your operating needs. 3-Band Parametric Microphone Equalizer! The power of DSP also provides tremendous benefits for transmission, as well as reception. The Three-Band Parametric Microphone Equalizer allows unmatched capability to tailor your speech characteristics: in each of the three bands, you may adjust the center frequency of the equalization, the frequency spread over which the equalization is applied, and the amplitude (peaking or nulling) within that equalization range. The result is sparkling, clear audio that will be the envy of everyone else on the band! Outstanding Strong-Signal-Handling Capabilities Derived from the FTDX9000! Following in the renowned path of the FTDX9000, the FT-2000/D is crafted with a comprehensive design view that accounts for all aspects of the strong signal environment, and especially with optimization of weak-signal in a multiple-strong-signal environment.
The receiver of the FT-2000/D is a triple-conversion type, utilizing great care in the gain distribution through all IF stages. The first mixer is a GaAs FET Doubly-Balanced Mixer type, fed by a four-VCO PLL synthesizer (30 kHz – 10.5 MHz, 10.5 MHz – 24 MHz, 24 MHz – 39 MHz, and 39 MHz – 56 MHz). The resulting first IF is at 69.450 MHz, utilizing an up-conversion technique that yields excellent image rejection. FTDX9000-Lineage Triple Roofing Filter System for Crowded Bands (Main Band VFO) The first IF of the FT-2000/D features three roofing filters, I bandwidths of 15 kHz, 6 kHz, and 3 kHz, optimized by mode for best performance on today’s crowded bands. Especially useful during busy contest weekends, the Roofing Filters are positioned right after the first mixer, improving IP3 (3rd-Order Intercept Point) performance for all stages that follow. The Ultimate Low-Band DXer RF Preselection Filter: YAESU’s Exclusive ?-Tuning! On the lower Amateur bands, the signal voltages impinging on a receiver can create noise and Intermodulation effects that can cover up weak signals you’re trying to pull through. So YAESU’s engineers developed the ? (Mu) Tuning system for the FTDX9000, and it’s now available as an option for the FT-2000/D. Three modules are available (MTU-160, MTU-80/40, MTU-30/20), and these modules may be connected externally with no internal modification required! When ?-Tuning is engaged, the standard VRF (Variable RF Preselector) system is bypassed, but the fixed Bandpass Filters are still in the received signal path.
The ?-Tuning filters utilize a stack of large 1.1” (28 mm) Ni-Zn Ferrite cores, driven through a silver-plated coil assembly by a precision stepper motor. The resulting high Q (typically over 300) provides a very steep resonance peak near your operating frequency. The peak may be adjusted away from your frequency, for even greater protection from a specific station, and a graphical depiction of the ?-Tune filter alignment appears on the front panel of the transceiver. Unique Receiver Configuration Display When operating at a frantic pace, it’s a comfort to have such comprehensive information available on the front panel’s huge display. The FT-2000/D’s unique "Receiver Configuration Display” calls out status for each step in the receiver’s RF and IF, and the fluorescent display also provides both graphical and numerical depiction of the bandwidth and the alignment of the various interference-rejection filters. And the high-resolution analog multi-meter allows you to monitor PO/COMP/SWR/ID/VDD/ALC both effortlessly and precisely. Dual Receive Capability for Effortless Split Operation During Split operation, Dual Receive may be engaged so that you may listen to both sides of the pile-up (or watch a particular frequency on the same band for activity). One push of the appropriate or indicator will engage or disengage the receiver or transmitter on the Main or Sub VFO, and the (TX Watch) button also lets you listen to your transmit frequency during casual Split operation. The Sub Receiver also has a slot for an optional Collins? Mechanical CW filter, if desired: choose the YF-122C (500 Hz) or the YF-122CN (300 Hz). The Sub Receiver is an analog type, with no DSP filters. Enhance Operation using External Display (option)! A wide array of informative and useful displays, identical to those available on the FTDX9000D, can be obtained by adding the optional DMU-2000 Data Management Unit and an after-market display (not supplied). You get an Audio Scope (plus “Waterfall”) and Oscilloscope, Logging Page, Band Scope, World Clock with Sunrise/Sunset Terminator Display, Swept-frequency SWR display, Memory Channel listing, Rotator Control display with Great Circle Map, and a comprehensive Menu listing, as well. Enjoy the ultimate in operating ease by adding the DMU-2000! Five-Group, 99-Channel memory with 5-Channel Quick Memory Bank (QMB) The 99 memories may be organized into up to five memory groups (up to 20 channels each), and with the addition of the optional DMU-2000 Data Management Unit, you can connect your keyboard (not supplied) and add memory labels (names), edit data, and perform backup and other functions, as well, using an external computer monitor (not supplied).
In addition, the one-touch Store (STO) and Recall (RCL) keys allow you instant access to a five-channel Quick Memory Bank that gives you access to five frequencies on a first-in, first-out running basis. A Host of Features for the CW Enthusiast! The front and rear panels have their own key jacks, which may be set up independently for connection of a keyer paddle (for use with the internal keyer), a straight key or bug, or a computer-driven keying interface for use with contest logging software, etc.
With the FT-2000/D, you can use both your ears and your eyes to zero in on another CW station. The CW SPOT switch engages a spotting tone that matches the offset of your transmitted signal (as set by the CW Pitch selection), allowing you to match that pitch to that of an incoming signal perfectly. And the CW Tuning Indicator provides a graphical depiction of the tuning process, with a ? marker lighting up when the incoming signal is precisely aligned with yours. Five-Channel Digital Voice Memory and 15-Second Digital RX Recorder For storage and playback of repetitive messages you have to transmit in a contest, the four-channel Digital Voice Recorder (5 channels when using the optional FH-2 Keypad) will quickly and efficiently let you store CQ, Contest Number, and “QRZ” messages. On receive, a running 15-second loop recorder lets you stop the recording and play back the just-received audio, so you can confirm a callsign, for example. Huge Precision Main Tuning Dual! The front panel’s oversized 2.67” (68 mm) Main Tuning Knob is crafted using a brass JISC3604R alloy, for easy flywheel-effect frequency excursions or precision tuning of weak digital signals. The torque of the tuning knob shaft may be adjusted for just the amount of drag you prefer, and all it will take is one spin of the dial for you to know that you are in command of a serious radio! Built-in 100-Memory Automatic Antenna Tuner The 100 memories of matching-point data allow you to tune around the bands without the need to re-tune as you go. The special antenna tuner memories ensure efficient operation, as well as lightning-fast matching at new operating frequencies, as needed.
The Automatic Antenna Tuner has a matching range of 16.7 to 150 Ohms (50 MHz: 25 - 100 Ohms). Personal Computer Control Softwre Available for Free Download! Just go to the "Files" tab in this area, and look for the "PCC-2000-E" Zip File. Download it for free, and enjoy your "virtual front panel" of the FT-2000/D on your computer screen. And Much, Much More. . . Flexible Connection Points for RTTY, SSTV, PSK31, JT65 (EME) and other Digital Modes; VOX (Automatic voice-operated TX/RX control); All mode Squelch; FM Mode: 50-Tone CTCSS Encode/Decode System; Band-Specific Repeater Shifts for 29/50 MHz FM; Wide/Narrow modes for AM and FM; Flexible, easy-to-use VFO/Memory command selections: A>B, A=B, V/M, M>A, A>M; Memory Channel Offset Tuning (MT); Versatile Scanning Capability; Versatile Menu Mode for customization of setup and features; Transverter Jack; Constant-level rear-panel sound recording jack; Comprehensive external RS-232C computer control (CAT) protocol; Optional FH-2 Keypad provides ease of control for CW or Voice Messages and Receiver Loop recording.
以上資訊轉載自http://www.yaesu.com
線上瀏覽說明書
http://www.hamtalk.asia/efiles/FT-2000.swf
操作說明書：檔案較大，請將以下壓縮檔全部下載放在同一個資料夾，選其中一個解壓縮即可。
英文版 pdf
アマチュア無線
{:4_102:} 已經操作過了{:4_100:} 好強的裝備喔..........看了流口水了 夢想中的裝備....
口水狂流啦? 回復turboone
在哪操作過快快重時招來
蟋蟀 發表於 2010-6-25 12:09 http://www.hamtalk.com.tw/images/common/back.gif
:lol建議小鬥魚要上傳實機照片才有感覺 補上！
好漂亮阿......
嘆為觀止.......＠＠ 不錯不錯 有錢真好用{:4_104:} 有人要收徒弟嗎:D 買回來如果未有買配件等如垃圾。 真水 200瓦 ㄝ不貴讚 補充部分功能 中文說明備用
1. 【MOX】按下此按鍵占有PTT按鍵功能
2. 【VOX】背景燈按鍵
3. 【DIM】聲控按鍵
4. 【PHONES】耳機插口
5. 【POWER】開關按鍵
6. 【KEY】電鍵插口
7. 手咪連接插口
8. 【IPO】前置放大按鍵
9. 【ANTENNA SELECT】天線選擇按鍵
10.【TUNE】天調調諧按鍵
11.【METER】功能表按鍵
12.【MONI】監聽按鍵
13.【MONI /PITCH】音頻增益等級/ CW按鍵音調旋鈕
14.【AGC /ATT】自動增益選擇者/前置衰減旋鈕
15.【MIC/ PROC】SSB發射麥克風水平調整/中央處理器調整旋鈕
16.【PROC】中央處理器按鍵
17.【VOX/ DELAY】聲控增益調整/延遲時間調整旋鈕
18.【KEYER】CW電子按鍵的開啟和關閉
19.【SPEED /CW】CW電子按鍵速度/CW延時旋鈕
20.【BK-IN/SPOT】CW插入/音按鍵
21.【NB/SQL】噪音抑制/靜噪旋鈕
22.【NB】噪音抑制按鍵
23.【VRF/μ-T】VRF/u調諧按鍵
24.【（VRF/μ-T） /NTCH】VRF/u調諧/濾波器外形選擇旋鈕
25.【NTCH】濾波器外形選擇按鍵
26.【DNF】數字濾波器功能按鍵
27.【R.FLT】中頻濾波器的選擇
28.【DNR】數字降噪電路按鍵
29.【CONT/ DNR】濾波器形狀選擇/數字降噪電路旋鈕
30.【CONT】濾波器形狀的開啟和關閉
31.【MODE】操作模式選擇按鍵
32.【QMB】快速記憶模式按鍵
33.主段接收指示燈/按鍵
34.主段發射指示燈/按鍵
35.主旋鈕
36.【FAST】快速步進調整按鍵
37.【LOCK】鎖定按鍵
38.【NAR】窄帶選擇按鍵
39.【SPLIT】分頻按鍵
40.【TXW】分頻操作監聽發射頻率按
41.【C.S】直接調出菜單選項
42.【A►B】將VFO-A的頻率複製到VFO-B
43.【B►A】將VFO-B的頻率複製到VFO-A
44.【B↔A】將VFO-A和VFO-B的頻率交換
45.【V/M】VFO模式和記憶存儲模式之間轉換按鍵
46.【M►A】存儲選擇頻率按鍵
47.【A►M】將VFO-A的頻率存儲記憶頻道
48.VFO-A接收指示燈
49.發射指示燈
50.VFO-B接收指示燈
51.調諧補償指示燈
52.分頻操作指示燈
53.雙重接收指示燈
54.高駐波比指示燈
55.【S-Meter】主段功能表
56.【S-Meter】副段功能表
57.頻率顯示屏
58.【R.FLT】VFO-B中頻濾波器的選擇
59.【AGC ATT】VFO-B增益選擇/前置衰減旋鈕
60.【VRF】VFO-B VRF濾波器選擇
61.【VRF /NTCH】VFO-B VRF濾波器/中頻濾波器選擇旋鈕
62.【NTCH】VFO-B中頻濾波器按鍵
63.【NB/SQL】VFO-B噪音抑制/靜噪選擇旋鈕
64.【NB】VFO-B噪音抑制按鍵
65.【SHIFT/ WIDTH】主段補償/帶寬旋鈕
66.【CONT】VFO-B濾波器外形選擇按鍵
67.【CONT/ DNR】VFO-B濾波器外形/降噪等級選擇旋鈕
68.【DNR】VFO-B數字降噪功能按鍵
69.【DNF】VFO-B數字濾波器功能按鍵
70.【AF GAIN /RF GAIN】VFO-B音頻增益/射頻增益調整旋鈕
71.【AFL】音頻限制按鍵
72.【RF PWR /BIAS】功率輸出/SSB功率輸出旋鈕
73.【CLASS-A】CLASS-A 發射按鍵
74.CF卡槽
75.【AF GAIN/ RF GAIN】主段音頻增益/射頻增益調整旋鈕
76.【P.BACK】錄音功能按鍵
77.【AFL】VFO-A音頻限制按鍵
78.【SHIFT WIDTH】補償/帶寬旋鈕
79.【ACM】鄰近頻道監聽按鍵
80.【RX Indicator/Switch】VFO-B接收指示燈/按鍵
81.【TX Indicator/Switch】VFO-B發射指示燈/按鍵
82.【CLAR】微調整頻率按鍵
83.【BAND/MHz】頻段選擇按鍵/按鍵1MHz的步進選擇
84.【B-DISP】VFO-B DISP關閉按鍵
85.【MCH/GRP】記憶頻道的選擇/記憶組的選擇按鍵
86.【CLAR/VFO-B】VFO-B微調整頻率旋鈕
87.【FAST/RX】段頻率選擇/接收微調清零按鍵
88.【BAND/MHz / TX Switch】VFO-B頻段選擇/發射微調清零按鍵
89.【B.MODE/CLEAR】VFO-B模式選擇按鍵/微調清零按鍵
90.【A/B】VFO-A和VFO-B選擇按鍵
91.【 ~ /DISP】功能按鍵/顯示
92.【BAND】頻段選擇按鍵
93.TFT顯示屏
IPO操作是將前置的射頻信號進行放大，本機主段（VFO-A）和副段（VFO-B）都具有此功能如果想放大主段的信號，請按主段上的[ A-IPO switch]按鍵來選擇，此時紅色的按鍵燈亮起。如果使用副段的，請按副段上的按鍵選擇，此時橘紅色的按鍵燈亮起。如果關閉此功能，請再次按一下此按鍵即可。
四、ATT前置衰減操作ATT功能和IPO功能相反，是將前置的RF射頻先好進行衰減。本機的衰減功能是旋鈕，主段和副段的前置射頻信號都可以進行衰減，如果衰減的是主段，請使用主段的ATT旋鈕進行選擇，副段的可以使用副段的ATT旋鈕選擇衰減倍數。如果想關閉此功能，請將旋鈕放置到“0”。0:衰減器關閉–6 dB: 前置信號衰減6dB （信號電壓是原來電壓的 1/2)。–12 dB: 前置信號衰減 12dB（信號電壓是原來電壓的 1/4)。–18 dB: 前置信號衰減18dB （信號電壓是原來電壓的 1/8)。
五、使用μ-調諧功能1.按一下 按鍵，其紅色 LED燈將亮起。●μ-調諧電路將自動開啟，並對您的操作頻率進行調諧。●μ-調諧電路只對主段 (VFO-A) 14 MHz 以下的電路起作用。2. 請旋轉 旋鈕來調整背景噪音干擾●μ-調諧的位置將出現在TFT頻的左上角。●如果想要改變μ-調諧的中心濾波器，請旋轉，菜單選項 “GENERAL 043 μTUNEDIAL STEP”。●如果想要恢復標準默認設置，請按住 按鍵2秒鐘，就可以恢復到標準設置。K3.關閉此功能，請再按一下VRF/μ-T]按鍵，其紅色的LED燈熄滅。
頁:
[1]